Model | Description | Related Modules | Features |
FISCHER S101A004 to AMPMODU IV adapter | CAEN Digitizer Series 1.0, 741 Peak Sensing ADC | FISCHER S101A004 male to 3-pin AMPMODU IV female for clock signal / 10 cm | |
16 LEMO 00 or MCX to 2.54 mm 34-pin adapter | V785, N674, V1741, A371, N568E | 16 LEMO 00 female or MCX male to 2.54 mm 34-pin female / 1 m, 50 cm | |
16 LEMO 00 or MCX to 2.54 mm 34-pin adapter | V792 | 16 LEMO 00 female or MCX male to 2.54 mm 34-pin female / 1 m, 50 cm | |
LEMO to MCX cable adapter | CAEN Digitizer Series 1.0 | LEMO 00 male to MCX male / 1 m | |
BNC to MCX cable adapter | CAEN Digitizer Series 1.0 | BNC male to MCX male / 1 m | |
2.54mm 34 pin to two 16 pin cable adapter | V812, V814, V895, VME Digitizers Series 1.0, V1782 MCA, V1741 Peak Sensing ADC | Splits the 32 used pins of a single header-type connector into 2 16pin header-type connectors | |
1.27mm 68 pin to two 2.54mm 34 pin cable adapter | V862, CAEN TDC boards, V1495, V2495, DT5495 | Adapt one (Robinson Nugent 68-pin type) flat connector into two 34-pin Header connectors / 25 cm, For ECL inputs of CAEN TDC boards or ECL ports of V1495, V2495, DT5495 | |
16-ch Impedance adapter | V792 | 16 independent input channels on a 34 pin male header connector, Matches the QDC’s input impedance from 50 Ohm to 110 Ohm | |
USB RS485 adapter Board | N1568A | converts from USB to RS-485 | |
2.54mm 34 pin to two 34 pin cable adapter | VME Digitizer Series 1.0, V1782 MCA, V1741 Peak Sensing ADC | Splits the 32 used pins of a single header-type connector into two connectors of 34 pins (16 pin crimped) | |
2.54mm 34 pin to 34 pin cable adapter | A1442, A1429, N1068, N6741, VME Digitizers Series 1.0, V1782 MCA, V1741 Peak Sensing ADC, V972 | 2.54mm 34 pin female to 2.54mm 34 pin female / 50 cm | |
1.27mm 68 pin to four 2.54mm 16 pin cable adapter | V862, CAEN TDC boards, V1495, V2495, DT5495 | Adapt one (Robinson Nugent 68-pin type) flat connector into four 16-pin Header connectors / 25 cm, For ECL inputs of CAEN TDC boards or ECL ports of V1495, V2495, DT5495 | |
Clock & Sync cable assembly | CAEN Digitizer Series 2.0 | CLK-OUT / CLK-IN daisy chain front panel / 20 cm | |
Clock cable assembly Digitizer 1.0/2.0 | CAEN Digitizer Series 1.0, CAEN Digitizer Series 2.0 | CLK-OUT / CLK-IN daisy chain front panel between non homogenous digitizer series, / 20 cm | |
2.54mm header to the 2mm header adapter | 2740/2745 Digitizer Family | Adapts to 64 channels 2.54 mm header, Compliant to both single-ended and differential 2740/2745 models | |
MCX Coax to 2mm header adapter | 2740/2745 Digitizer Family (single-ended input models) | Adapts to 64 channels MCX, Compliant to single-ended 274xB models only | |
SMA to MCX cable adapter | A1423B, A1426, A1425 | 1,0 m | |
SMA to BNC cable adapter | A1423B, A1426, A1425 | 1,0 m | |
SMA to SHV cable adapter | A1423B, A1426, A1425 | 1,0 m | |
Double 2.54mm 34 pin to 68-pin ERNI adapter | V1741 Peak Sensing ADC, 740, 740D Digitizer Series | 2.54mm standard pitch, to 1.27mm ERNI connector (34 pin / 32 channels) | |
64 channel Adapter to 2.54mm Male Header Connector | A1429 | four 2.54mm 34 pin male header to Samtec ERF8-040-01-L-D-RA-L-TR male connector |