WidePIX L 2(1)x15

The large area imaging detector WidePIX L 2(1)x15 – MPX3 with a resolution of 512 (256) x 3840 pixels is composed of Medipix3 hybrid detector electronics tiles. Each tile (256 x 256 pixels) is attached to a silicon or CdTe sensor. Therefore, the whole area of the device is fully sensitive, and there are no gaps between sensor tiles.

Each pixel has two integrated 12-bit digital counters and two energy discrimination thresholds. The counters store number of registered particles, e.g., X-ray photons, with energy above the appropriate threshold. Both counters can be joined to a single 24-bit counter, providing an enhanced dynamic range. The particle counting principle eliminates any additional noise generated by the sensor or electronic readout. It allows for acquiring X-ray images with high contrast and wide dynamic range. Therefore, even low-contrast structures such as plastic or soft tissue are easily detectable in X-ray images.

WidePIX 2(1)x5 – MPX3 camera consists of either 2×5 or 1×5 Medipix3 devices. Both devices are suitable for CT scanners, which can take advantage of large sensitive areas without any gaps. Moreover, the WidePIX 1×15 – MPX3 variant supports a hardware-based Time-Delayed-Integration mode for online (continuous) scanning applications.

The energy discrimination thresholds of Medipix3 technology allow spectral X-ray imaging. Different materials in an inspected sample could then be identified based on spectral X-ray attenuation properties. Energy spectra could be measured typically from 5 keV upwards.

The Charge Summing Mode implemented in the pixel electronics provides hardware-based correction of signal cross-talk between pixels. This further considerably improves the detector spectral response and the quality of spectra measured in individual pixels.

The camera is connected to a computer via three ethernet cables.